Indice delle classi standard come quello di ClassicThesis

Ciao Enrico,

ho provato a usare il codice che mi hai fornito. Il risultato qualitativo è proprio quello che desideravo :). C’è, però, un piccolo problema (non vorrei fare il guastafeste): se uso uno stile dei capitoli (nel mio caso Sonny), quando uso il tuo codice, non viene mantenuto lo stile scelto, ma quello “classico” della classe in uso. Si può fare qualcosa? 🙁

Posto il preambolo che uso:
`
\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage[italian]{babel}
\usepackage{microtype}
\usepackage[tight,italian]{minitoc}

\usepackage{tocloft}
\renewcommand{\cftchapfillnum}[1]{\nobreak\hspace{1.5em}\textbf{#1}\cftparfillskip\par}
\renewcommand{\cftsecfillnum}[1]{\nobreak\hspace{1.5em}#1\cftparfillskip\par}
\renewcommand{\cftsubsecfillnum}[1]{\nobreak\hspace{1.5em}#1\cftparfillskip\par}

\linespread{1.05} %per il palatino

\usepackage[binding=5mm]{layaureo}

\usepackage[babel,italian=guillemets]{csquotes}
\usepackage[style=philosophy-modern,square=true,backref,ibidtracker=false]{biblatex}
\bibliography{Bibliografia.bib}

\usepackage{mathpazo}
\usepackage[scaled=.95]{helvet}
\usepackage{courier}
\usepackage{pifont}
\usepackage{calligra}

\usepackage{amssymb,amsmath,amsthm}
\usepackage{mathrsfs,eucal,dsfont}
\usepackage{bbm}
%\usepackage{eulervm}

\usepackage{epsfig}
\usepackage{graphicx}
\usepackage{wrapfig}

\usepackage{footnote}

\graphicspath{{../Immagini/}}

\usepackage{rotating}

\usepackage{tabularx}
\makesavenoteenv{tabular}
\usepackage{array}
\usepackage{booktabs}
\usepackage{multicol}
\usepackage{multirow}
\usepackage{longtable}

\usepackage{xcolor}

\usepackage[font={small,sf},format=hang,labelfont={sf,bf}]{caption}
\usepackage[bf]{subfig}
\setlength{\captionmargin}{.10\textwidth}
\captionsetup[table]{position=top}

\usepackage[italian]{varioref}

\usepackage{upgreek}

\usepackage{empheq}

\usepackage[decimalsymbol=comma]{siunitx}
\sisetup{detect-display-math=true}

\usepackage{listings}
\lstset{language=Matlab,basicstyle=\small\ttfamily}

\usepackage[pdfborder=000,pdfstartpage=1]{hyperref}

\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}

\numberwithin{equation}{section}
\numberwithin{figure}{section}
\numberwithin{subfigure}{section}

\DeclareRobustCommand{\vect}[1]{
\ifcat#1\relax
\boldsymbol{#1}
\else
\mathbf{#1}
\fi}
\DeclareRobustCommand{\mat}[1]{
\ifcat#1\relax
\boldsymbol{#1}
\else
\mathbf{#1}
\fi}

\makeatletter
\newcommand{\der}[2]{\begingroup
\@tempswafalse\toks@={}\count@=\z@
\@for\next:=#2\do
{\expandafter\check@var\next\@nil
\advance\count@\der@exp
\if@tempswa
\toks@=\expandafter{\the\toks@\,}%
\else
\@tempswatrue
\fi
\toks@=\expandafter{\the\expandafter\toks@\expandafter\partial\der@var}}%
\frac{\partial\ifnum\count@=\@ne\else^{\number\count@}\fi#1}{\the\toks@}%
\endgroup}
\def\check@var{\@ifstar{\mult@var}{\one@var}}
\def\mult@var#1#2\@nil{\def\der@var{#2^{#1}}\def\der@exp{#1}}
\def\one@var#1\@nil{\def\der@var{#1}\chardef\der@exp\@ne}
\makeatother
%esempio:\der{f}{*{2}{x_i},y}

\makeatletter
\newcommand{\dert}[2]{\begingroup
\@tempswafalse\toks@={}\count@=\z@
\@for\next:=#2\do
{\expandafter\check@var\next\@nil
\advance\count@\der@exp
\if@tempswa
\toks@=\expandafter{\the\toks@\,}%
\else
\@tempswatrue
\fi
\toks@=\expandafter{\the\expandafter\toks@\expandafter d\der@var}}%
\frac{d\ifnum\count@=\@ne\else^{\number\count@}\fi#1}{\the\toks@}%
\endgroup}
\def\check@var{\@ifstar{\mult@var}{\one@var}}
\def\mult@var#1#2\@nil{\def\der@var{#2^{#1}}\def\der@exp{#1}}
\def\one@var#1\@nil{\def\der@var{#1}\chardef\der@exp\@ne}
\makeatother

\renewcommand{\epsilon}{\varepsilonup}
\renewcommand{\phi}{\varphi}
\renewcommand{\theta}{\vartheta}

\newenvironment{citazione}
{\begin{quotation}\small}
{\end{quotation}}

\DeclareMathAlphabet{\mathpzc}{OT1}{pzc}{m}{it}
\DeclareMathOperator{\arcot}{arcot}
\DeclareMathOperator{\diverg}{div}
\DeclareMathOperator{\rot}{rot}

\newcommand{\hod}[1]{^{\scriptscriptstyle\mathrm{#1}}}

%*******************************************************************************
% FANCY…
%*******************************************************************************

\usepackage[Sonny]{fncychap}
\usepackage{fancyhdr}

\pagestyle{fancy}
\fancyhf{}
\fancypagestyle{plain}{%
\renewcommand{\headrulewidth}{0pt}%
\fancyhf{}\fancyfoot[C]{\sffamily\thepage}%
}

\renewcommand{\chaptermark}[1]{%
\markboth{#1}{}}
\fancyhead[RE]{\sffamily\leftmark}

\renewcommand{\sectionmark}[1]{%
\markright{\thesection\ #1}}
\fancyhead[LO]{\sffamily\rightmark}

\fancyhead[RO,LE]{\sffamily\thepage}
\renewcommand{\headrulewidth}{0pt}
\setlength{\headheight}{13.59999pt}
\usepackage{emptypage}

\usepackage{etex}
\usepackage{pgfplots}
\pgfplotsset{compat=newest}`

Intanto ti ringrazio molto. Ciao,
Marco.

Se mi è permesso, già che disturbo… vorrei chiedere se è possibile fare la stessa cosa fatta per l’indice con l’elenco figure e l’elenco tabelle.

Grazie mille,
Marco.

Rinuncia a fncychap, ti prego.

Ci posso provare :D.

Per gli elenchi delle figure e delle tabelle? Come posso renderli come l’indice? (Senza puntini e con i numeri delle pagine vicine ai titoli.)

Grazie,
Marco.

Perfetto 😀 .

Grazie mille,
Marco.