Ciao a tutti,
dovrei realizzare una tabella costituita da 3 sottotabelle disposte una sotto l’altra. Ho usato il pacchetto subfig. con il seguente codice:…
Purtroppo in questo modo le tabelle mi vengono disposte una accanto all’altro, Come posso fare per disporle una sotto l’altra?
P.S. sto scrivendo un articolo a doppia colonna.
Non hai alcuna speranza di inserire tutta quella roba in una sola colonna. Meglio usare l’ambiente “table*”:
`\begin{table*}
\caption{Mean value, symmetric standard deviation (SSD), asymmetric standard deviation (ASD)
and range of percentage of identified marker, time needed to execute the test, distance
covered by the robot arm EE, number of magnetic link losses (\#MLLs) and robot EE mean
velocity for the three interfaces. (M. stands for Mean)}
\label{ist}
\centering
\newcommand{\ccol}[1]{\multicolumn{1}{c}{\textbf{#1}}}
\subfloat[]{\begin{tabular}{lrrrr}
\toprule
\textbf{HR cooperative control} & \ccol{M.} & \ccol{SSD} & \ccol{ASD} & \ccol{Range} \\
\midrule
\textbf{Marker} (\%) & 84.6 & 6.2 & $+6.9$/$-6.5$ & 72.7–92.3 \\
\textbf{Time} (s) & 298 & 95 & $+81$/$-69$ & 157–499 \\
\textbf{Distance} (m) & 2.6 & 1.2 & $+1.1$/$-1.2$ & 1–5.2 \\
\textbf{\#MLLs} & 3.5 & 1.5 & $+1.7$/$-1.8$ & 0–6 \\
\textbf{EE velocity} (mm/s) & 8.9 & 3.4 & $+2.9$/$-3.5$ & 5.4–16.5 \\
\bottomrule
\end{tabular}}\\
\subfloat[]{\begin{tabular}{lrrrr}
\toprule
\textbf{3DConnection T. control} & \ccol{M.} & \ccol{SSD} & \ccol{ASD} & \ccol{Range} \\
\midrule
\textbf{Marker} (\%) & 79.6 & 11.3 & $+11.2$/$-11.7$ & 55.6–92.3 \\
\textbf{Time} (s) & 440 & 124 & $+148$/$-146$ & 264–707 \\
\textbf{Distance} (m) & 1.3 & 0.4 & $+0.5$/$-0.5$ & 0.7–2.0 \\
\textbf{\#MLLs} & 1.9 & 1.2 & $+1.1$/$-0.9$ & 0–4 \\
\textbf{EE velocity} (mm/s) & 3.0 & 0.8 & $+0.6$/$-0.6$ &2.0–5.1 \\
\bottomrule
\end{tabular}}\\
\subfloat[]{\begin{tabular}{lrrrr}
\toprule
\textbf{Phantom T. control} & \ccol{M.} & \ccol{SSD} & \ccol{ASD} & \ccol{Range} \\
\midrule
\textbf{Marker} (\%) & 79.6 & 10.6 & $+12.8$/$-12.2$ & 55.6–90.9 \\
\textbf{Time} (s) & 573 & 216 & $+172$/$-182$ & 280–1006 \\
\textbf{Distance} (m) & 1.1 & 0.5 & $+0.5$/$-0.47$ & 0.4–2.2 \\
\textbf{\#MLLs} & 2.0 & 1.1 & $+1$/$-0.9$ & 0–4 \\
\textbf{EE velocity} (mm/s) & 1.9 & 0.7 & $+0.9$/$-0.8$ & 1.1–3.7 \\
\bottomrule
\end{tabular}}
\end{table*}`
E adesso caccia alle differenze come sulla Settimana Enigmistica. 🙂 Se non capisci qualcosa, chiedi. Occorre caricare il pacchetto booktabs.
Ciao
Enrico