gabbiano85

ecco avrei alcun problemi con le immagini e tabelle.
Per completezza inserisco qui il file Master da cui parte tutto, ed il capitolo 1.
Al fondo ci sono le domande e le lacune:
chiedo solo una cosa:VI PREGO AIUTATEMI!!!! :p

%% —————————————————————-
%% Thesis.tex — MAIN FILE (the one that you compile with LaTeX)
%% —————————————————————-

% Set up the document
\documentclass[a4paper, 12pt, oneside]{thesis} % Use the “Thesis” style, based on the ECS Thesis style by Steve Gunn
\usepackage[pdftex]{graphicx}
\usepackage{picinpar}
\graphicspath{{Figures/}} % Location of the graphics files (set up for graphics to be in PDF format)
% Include any extra LaTeX packages required
\usepackage[square, numbers, comma, sort&compress]{natbib} % Use the “Natbib” style for the references in the Bibliography
\usepackage{verbatim} % Needed for the “comment” environment to make LaTeX comments
\usepackage{vector} % Allows “\bvec{}” and “\buvec{}” for “blackboard” style bold vectors in maths
\hypersetup{urlcolor=red, colorlinks=true} % Colours hyperlinks in blue, but this can be distracting if there are many links.
\usepackage{subfigure}

%% —————————————————————-
\begin{document}
\frontmatter % Begin Roman style (i, ii, iii, iv…) page numbering
% Set up the Title Page
\title {\textbf{Active System of Building:}\\\textsc{\textsl{Solar Panel System Efficiency\\(Application study-case)}}}
\authors {\texorpdfstring {\href{gabbiano85@gmail.com}{Damiano Zurlo}} {Damiano Zurlo} }
\addresses {\groupname\\\deptname\\\univname} % Do not change this here, instead these must be set in the “Thesis.cls” file, please look through it instead
\date {\today}
\subject {casetta mia}
\keywords {parola chiave}
\maketitle
%% —————————————————————-

\setstretch{1.3} % It is better to have smaller font and larger line spacing than the other way round

% Define the page headers using the FancyHdr package and set up for one-sided printing
\fancyhead{} % Clears all page headers and footers
\rhead{\thepage} % Sets the right side header to show the page number
\lhead{} % Clears the left side page header

\pagestyle{fancy} % Finally, use the “fancy” page style to implement the FancyHdr headers

%% —————————————————————-
% IN QUESTO SPAZIO INSERIRE LA DICHIARAZIONE DI AUTENTICITà
%% —————————————————————-

% The Abstract Page
\setstretch{1.3} % Reset the line-spacing to 1.3 for body text (if it has changed)
\addtotoc{Abstract} % Add the “Abstract” page entry to the Contents
\emph{\textit{\textsl{
\begin{center}
\emph{ABSTRACT}
\end{center}
}}}
The main issue of this final project …

\clearpage % Abstract ended, start a new page
%% —————————————————————-

\setstretch{1.3} % Reset the line-spacing to 1.3 for body text (if it has changed)

% The Acknowledgements page, for thanking everyone
\acknowledgements{
\addtocontents{toc}{\vspace{1em}} % Add a gap in the Contents, for aesthetics

I would like to say thanks to…}
\clearpage % End of the Acknowledgements
%% —————————————————————-

\pagestyle{fancy} %The page style headers have been “empty” all this time, now use the “fancy” headers as defined before to bring them back

%% —————————————————————-
\lhead{\emph{Contents}} % Set the left side page header to “Contents”
\tableofcontents % Write out the Table of Contents
%% —————————————————————-
\lhead{\emph{List of Figures}} % Set the left side page header to “List if Figures”
\listoffigures % Write out the List of Figures
%% —————————————————————-
\lhead{\emph{List of Tables}} % Set the left side page header to “List of Tables”
\listoftables % Write out the List of Tables
%% —————————————————————-
\setstretch{1.5} % Set the line spacing to 1.5, this makes the following tables easier to read

\clearpage % Start a new page
\lhead{\emph{Abbreviations}} % Set the left side page header to “Abbreviations”
\listofsymbols{ll} % Include a list of Abbreviations (a table of two columns)
{% \textbf{Acronym} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or \\
\textbf{LAH} & \textbf{L}ist \textbf{A}bbreviations \textbf{H}ere \\}

%% —————————————————————-
\clearpage % Start a new page
\lhead{\emph{Physical Constants}} % Set the left side page header to “Physical Constants”
\listofconstants{lrcl} % Include a list of Physical Constants (a four column table)
{
% Constant Name & Symbol & = & Constant Value (with units) \\
Speed of Light & $c$ & $=$ & $2.997\ 924\ 58\times10^{8}\ \mbox{ms}^{-\mbox{s}}$ (exact)\\

}

%% —————————————————————-
\clearpage %Start a new page
\lhead{\emph{Symbols}} % Set the left side page header to “Symbols”
\listofnomenclature{lll} % Include a list of Symbols (a three column table)
{
% symbol & name & unit \\
$a$ & distance & m \\
$P$ & power & W (Js$^{-1}$) \\
& & \\ % Gap to separate the Roman symbols from the Greek
$\omega$ & angular frequency & rads$^{-1}$ \\
}
%% —————————————————————-
% End of the pre-able, contents and lists of things
% Begin the Dedication page

\setstretch{1.3} % Return the line spacing back to 1.3
\pagestyle{empty} % Page style needs to be empty for this page
\dedicatory{For/Dedicated to/To my\ldots}
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics

%% —————————————————————-
\mainmatter % Begin normal, numeric (1,2,3…) page numbering
\pagestyle{fancy} % Return the page headers back to the “fancy” style

% Include the chapters of the thesis, as separate files
% Just uncomment the lines as you write the chapters
\input{./Chapters/Chapter1} % CAPITOLO 1
\input{./Chapters/Chapter2} % CAPITOLO 2
\input{./Chapters/Chapter3} % CAPITOLO 3
\input{./Chapters/Chapter4} % CAPITOLO 4
\input{./Chapters/Chapter5} % CAPITOLO 5
\input{./Chapters/ChapterC} % CAPITOLO CONCLUSIONI
%% —————————————————————-
% Now begin the Appendices, including them as separate files
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\appendix % Cue to tell LaTeX that the following ‘chapters’ are Appendices
\input{./Appendices/AppendixA} % Appendix Title
%\input{./Appendices/AppendixB} % Appendix Title
%\input{./Appendices/AppendixC} % Appendix Title
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\backmatter
%% —————————————————————-
\label{Bibliography}
\lhead{\emph{Bibliography}} % Change the left side page header to “Bibliography”
\bibliographystyle{unsrtnat} % Use the “unsrtnat” BibTeX style for formatting the Bibliography
\bibliography{Bibliography} % The references (bibliography) information are stored in the file named “Bibliography.bib”
\end{document} % The End
%% —————————————————————-

%___________________________________________________________________________________________________________________________________________________
%ORA SEGUE IL CAPITOLO 1%
%___________________________________________________________________________________________________________________________________________________
%

% Chapter 1

\chapter{ACTIVE SOLAR SYSTEM} % Write in your own chapter title
\label{Chapter1}
\lhead{Chapter 1. \emph{ACTIVE SOLAR SYSTEM}} % Write in your own chapter title to set the page header

\section{Photovoltaic Basic}

Photovoltaic (PV) System

ecc…e continua così…

ECCO I PROBLEMI

1)

\begin{table}[ht]
\centering
\includegraphics{./Figures/Solar Cell Types.png}
\caption{Solar Cell Types}\label{fig:Cell Types}
\end{table}

1) QUESTO è UNO SCHEMA CHE HO FATTO IN WORD ED HO INSERITO IN LATEX,LUI LO ACCETTA E INSERISCE BENISSIMO COME PNG,MA MI LASCI LA DICITURA DELL’ESTENSIONE DEL FILE SOPRA LO STESSO [Cell Types.pngCell Types.png],COME POSSO EVITARE??
______________________________________________________________________________________________________________________________________________________
2)

% INIZIO DELLA TABELLA
\begin{table}[ht]
\centering
\begin{tabular}{|c|c|p{10cm}|}
\multicolumn{2}{c}
{\textbf{MONO – CRYSTALLINE (SINGLE – CRYSTAL) SILICON CELLS}} \\% TITOLO DELLA TABELLA
\hline
\textbf{\texttt{\textit{CHARACTERISTICS}}} & \textbf{\texttt{\textit{DESCRIPTIONS}}}\\ %TITOLI NELLE COLONNE
\hline
Efficiency&15\% – 18\%\\
\hline
Form&
\begin{tabular}{@|p{10cm}}
Depending upon how much of the mono-crystal is sliced away, round, semi-round or square cells are created. Round cells are cheaper than semi-round or square cells since less material is wasted in their production. Despite this, they are rarely used in standard modules because when placed next to each other in a module, they do not employ the space efficiently. However, in special modules for building integration where partial transparency is desired, or for solar home system, round cells are a perfectly viable alternative.
\end{tabular}\\
\hline
Usual Size&
\begin{tabular}{@|p{10cm}}
10$cm^{2}$x10$cm^{2}$; 12,5$cm^{2}$x12,5$cm^{2}$;
15$cm^{2}$x15$cm^{2}$;\diameter 12,5cm or 15cm
\end{tabular}\\
\hline
Thickness&0,2mm to 0,3mm\\
\hline
Appearance&Uniform\\
\hline
Colour&Dark blue to black; grey\\
\hline
\end{tabular}
\label{table:TAB.MONO-CRY} % REFERENZA DA INSERIRE NEL TESTO
\caption{Mono – crystalline (single – crystal) silicon cells}\\ % TITOLO CHE SI VEDE NELLA LISTA DELLE TABELLE
\end{table}% FINE DELLA TABELLA

2) LA TABELLA è PERFETTA SOLO CHE ALCUNE COLONNE (ENTRO CUI HO DOVUTO INSERIRE un testo lungo) HANNO UN CAZZO DI TRATTINO CHE NON RIESCO A TOGLIERE..COME POSSO FARE??

______________________________________________________________________________________________________________________________________________________
3)

\begin{figure}[htbp]
\begin{minipage}{0.5\textwidth}
\centering
\includegraphics[width=4cm]{./Figures/Silicon Structure.pdf}
\caption{Crystallline Silicon Structure}
\end{minipage}\hfill
\begin{minipage}{0.5\textwidth}
\centering
\includegraphics[width=5cm]{./Figures/Diffusion of electrons and holes.pdf}
\caption{Diffusion of electrons and holes}
\end{minipage}
\caption{Formation of space charge region at the p-n junction through the diffusion of electrons and holes}
\end{figure}

3) IL PROBLEMA è SIMILE AL PRIMO IN UN DOPPIO INSERIMENTO DELL’IMMAGINE SU UNA STESSA RIGA COME VEDI IN ALLEGATO, TUTTO è PERFETTO, TUTTO FUNZINOA, ECCETTO STA CAZZO DI ESTENSIONE SOPRA L’IMMAGINE CHE NON RIESCO A TOGLIERE.
HO PROVATO SIA AD INSERIRE COME PDF L’IIMAGINE CHE COME ALTRI FORMATI, E SOLO IL PDF RIESCO AD INSERIRLO,ANZI, GL’ALTRI MI Dà SEMPRE PROBLEMI. IL FORMATO DVS POI NON PARLIAMONE CHE SEMBRA RIGETTARLO. HO PROVATO CON L’AMBIENTE MINIPAGE E CON IL SUBFIGURE..MA NIENTE..ANZI QUESTO MINIPAGE MI PARE MEGLIO DELL’ALTRO CHE Fà CAPRICCI..BOH.