Risposte nei forum create
-
AutoreRisposte
-
::
Nel file fronte.tex scrivo:`
\documentclass[a4paper,titlepage]{book}\usepackage[italian]{babel}
\usepackage[sans,nouppercase]{frontespizio}\begin{document}
\begin{frontespizio}
\Universita{Perugia}
\Facolta{}
\Corso[Laurea]{Economia}
\Titoletto{Tesi di laurea}
\Titolo{titolo tesi}
\Candidato{mio nome}
\Relatore{Prof. suo nomei}
\Annoaccademico{2015-2016}
\Rientro{1.5cm}
\NCandidato{Laureando}
\Punteggiatura{}\end{frontespizio}
\end{document}
`Mentre nel file fronte-frn.tex scrivo:
`
%% This file has been automatically generated by `frontespizio'.
%% Don't use it as a model for a new frontispiece, use the
%% `frontespizio' environment in you document instead.
\documentclass [titlepage]{book}
\usepackage [a4paper,left=1cm,bottom=1.5cm,right=1cm,top=1cm]{geometry}
\usepackage {graphicx}
\usepackage [svgnames]{xcolor}
\usepackage[nowrite,signatures,infront,standard,nouppercase,sans]{frontespizio}
\nofiles
\fontoptionsans
\Universita {Perugia}
\Logo[5cm]{logo}
\Facolta {Economia}
\Corso [Laurea Magistrale]{in Economia}
\Titoletto {TESI DI LAUREA MAGISTRALE}
\Titolo {Titolo della tesi}
\Candidato {mio nome}
\Relatore {Prof. nome relatore}
\Annoaccademico {2015-2016}
\Rientro {1.5cm}
\NCandidato {Laureando}
\Punteggiatura {}
\begin {document}
\preparefrontpagestandard
\end {document}`
Ho salvato anche il logo dell’università di Perugia.
Il problema è che viene bello, ben fato… ma non è la stessa disposizione dell’università!Il docente è stato chiaro: o quello stile o cassa la tesi e non ci fa laureare. Io, ora, non so come rifare lo stesso stile con LaTeX, dato che a lui non va ben ciò che ho realizzato.
Non voglio rischiare di far saltare la data di laurea … anche perchè non c’è nessuna guida dell’università con un file pre impostato finora e mi chiedo i miei colleghi come abbiano fatto finora… mah … 😕
::
Ho provato a usare tanti codici e seguire le linee guida (della guida), ma ho sempre errori.
L’unico codice funzionate è il seguente:`
\documentclass[a4paper,titlepage]{book}\usepackage[italian]{babel}
\usepackage{frontespizio}\begin{document}
\begin{frontespizio}
\Universita {Perugia}
\Dipartimento{Immagino Matematica}
\Corso [Laurea]{Economia}
\Annoaccademico {2015-2016}
\Titolo {Nome della tua tesi}
\Candidato [numero matricola]{Mio nome} % se il numero di matricola non è richiesto puoi togliere le quadre
\Correlatore{Pinco Pallino}
\NCorrelatore{Avvocato, Professore, Ingegnere}{} % se non vuoi che il nome sia preceduto dal titolo togli questa opzione
\Relatore {Tizio Caio}
\NRelatore{Avvocato, Professore, Ingegnere}{} % se non vuoi che il nome sia preceduto dal titolo togli questa opzione
\end{frontespizio}\end{document}
`E questo
`
\documentclass[a4paper,titlepage]{book}\usepackage[italian]{babel}
\usepackage[sans,nouppercase]{frontespizio}\begin{document}
\begin{frontespizio}
\Universita{Padova}
\Facolta{Scienze Matematiche, Fisiche e Naturali}
\Corso[Laurea]{Matematica}
\Titoletto{Tesi di laurea}
\Titolo{Equivalenze fra categorie di moduli\\
e applicazioni}
\Candidato{Enrico Gregorio}
\Relatore{Ch.mo Prof.~Adalberto Orsatti}
\Annoaccademico{19??-19??}
\Rientro{1.5cm}
\NCandidato{Laureando}
\Punteggiatura{}\end{frontespizio}
\end{document}
`Solo che la pagina compilata è bianca!! 🙁
::
Perfetto, grazie mille dell’aiuto 😀Da neofita credevo di essere incapace io con qualche codice e riga… ma se il codice del tizio è poco funzionante, c’è poco da farci!
Guarderò i vari modelli di CV che mi hai consigliato. Questo mi era saltato all’occhio perché sembrava Smart e tutto raccolto 🙂
::
Ho eseguito i seguenti passaggi:
– creato sul desktop una cartella chiamata CV
– creato un file .tex di nome cv
– incollato in questo file cv.tex il seguente codice (preso dal link citato su)Spoiler
`
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Medium Length Professional CV
% LaTeX Template
% Version 2.0 (8/5/13)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original author:
% Trey Hunner (http://www.treyhunner.com/)
%
% Important note:
% This template requires the resume.cls file to be in the same directory as the
% .tex file. The resume.cls file provides the resume style used for structuring the
% document.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%—————————————————————————————-
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%—————————————————————————————-\documentclass{resume} % Use the custom resume.cls style
\usepackage
{geometry} % Document margins
\newcommand{\tab}[1]{\hspace{.2667\textwidth}\rlap{#1}}
\newcommand{\itab}[1]{\hspace{0em}\rlap{#1}}
\name{MOHIT B. SARVAIYA} % Your name
\address{“AMBIKA”,Patel Colony 9/2 Corner, Opp. Ajay Laxmi Bunglow,Jamnagar-361008.} % Your address
%\address{123 Pleasant Lane \\ City, State 12345} % Your secondary addess (optional)
\address{+91 886 622 1812 \\ mohit.sarvaiya@yahoo.in} % Your phone number and email\begin{document}
%—————————————————————————————-
% OBJECTIVE
%—————————————————————————————-\begin{rSection}{OBJECTIVE}
{Recently graduated, multidisciplinary boxer with excellent problem solving abilities and process-thinking skill seeks hands on experience within a company that embraces creativity and innovation.Through my studies, I have gained extensive knowledge of production and manufacturing engineering, product design, among many other components of Mechanical Engineering.Effective communicator who builds positive, cohesive relationship with all level of staff, eager to put my extensive studies to practical, applied use.}
\end{rSection}
%—————————————————————————————-
% EDUCATION SECTION
%—————————————————————————————-\begin{rSection}{Education}
{\bf Bachelor of Engineering in Mechanical Engineering} \hfill {August 2012 – May 2016}
\\
Sanjaybhai Rajguru College of Engineering, Rajkot.
\\
Gujarat Technological University, CGPA: 7.01/10.00{\bf Diploma in Mechanical Engineering} \hfill {August 2008 – June 2012}
\\
Government Polytechnic, Jamnagar.
\\
Gujarat Technological University, CGPA: 7.53/10.00{\textbf{SSC, Class X}} \hfill March 2007 – March 2008\\
Shree Parvatidevi High School, Jamnagar, Gujarat, 70.1\%
%Minor in Linguistics \smallskip \\
%Member of Eta Kappa Nu \\
%Member of Upsilon Pi Epsilon \\\end{rSection}
%—————————————————————————————-
% TECHNICAL STRENGTHS SECTION
%—————————————————————————————-\begin{rSection}{SKILLS and
INTERESTS}\begin{tabular}{ @{} >{\bfseries}l @{\hspace{6ex}} l }
Skills & Production and Manufacturing Engineering, Automobile Engineering, CAD/CAM,\\
Interests & Mechanical Part Design,Optimization,Quality Control and Assurance,Product Development\\
Design Software & Autocad, Creo, SolidWorks \\
Platforms & MS Word,C \\
\end{tabular}\end{rSection}
%—————————————————————————————-
% WORK EXPERIENCE SECTION
%—————————————————————————————-\begin{rSection}{PROJECTS}
\begin{rSubsection}{Implimentation Of Advance Product Quality Planning (APQP) \\ And Product Part Approval Process (PPAP)}{July 2015 – April 2016}{Major Project}{}
\item An Industrial Defined Project in collaboration with Echjay Industries Pvt Ltd., Rajkot
\item Quality Assurance Technique for reducing waste in material and optimizing a
manufacturing process.
\item Facilitate communication between industries.
\item Improve Customer Satisfaction.
\item Improve Product Quality.\end{rSubsection}
%————————————————.
\begin{rSubsection}{Automation In Threading Machine}{January 2012 – June 2012}{Major Project}{}
\item An Industrial Defined Project in collaboration with Manish Brass Industry, jamnagar
\item Main aim of the project is to reduce human effort and rate of rejection.
\item Designed the automatic attachment for threading machine.
\end{rSubsection}\end{rSection}
% EXAMPLE SECTION
%—————————————————————————————-\begin{rSection}{INTERNSHIP/TRAININGS} \itemsep -3pt
{Quality Control and Assurance Training at Echjay Industries Pvt. Ltd. Rajkot.} \hfill July 2015 – April 2016 \\
{Lab Technician, Senor Metal Pvt. Ltd, Jamnagar} \hfill june 2012 – Auguest 2012\\
{Mechanical Draftsman and Q.C Inspector, Geeta Machine Tools Pvt. Ltd, Jamnagar} \hfill May 2010 – May 2012 \\
\end{rSection}\begin{rSection}{POSITION OF RESPONSIBILITY}
\begin{rSubsection}{Mechanical Draftsman and Q.C Inspector}{May 2010 – May 2012} {Geeta Machine Tools Pvt. Ltd. Jamnagar} {}
\item Prepare 2D AND 3D Drawing and planning of a different CNC machine details
parts drawings and their assembly drawing.
\item Do some quality control work for maintain the quality of machine in the Units.
\item Prepare of foundation and electrical layout drawings.
\end{rSubsection}%————————————————
\begin{rSubsection}{Lab Technician}{june 2012 – Auguest 2012}{Senor Metal Pvt. Ltd. Jamnagar} {}
\item Do Some Mechanical Destructive Testing- Tensile Test, Impact Test,Hardness Test
\end{rSubsection}\end{rSection}
%—————————————————————————————-
\begin{rSection}{Extra-Cirrucular Activities} \itemsep -1pt {}
\item STTP on “Life Long Research” in SVNIT,Surat \hfill February 2016
\item Design War Cad, SRCOE, Rajkot, Secured 2rd rank in a state level competition\hfill January-2016
\item Design War Cad, B.H Gardi, Rajkot, Secured 2rd rank in a
state level competition. \hfill January-2014
\item Participated in National Level Technical Symposium Festival Edge and Above, SVIT, Vasad. \hfill February-2013
\item Participated in National Level Technical Symposium merda me Basix, SVIT, Vasad.
\hfill February-2013
\item Participated in National Level Technical Symposium Rise of Machine, SVIT, Vasad, \hfill March-2014\end{rSection}
\end{document}
`
– compilando con “compilazione rapida” (funziona su tutti i miei documenti) mi segnalava errore: file resume.cls non trovato
– ho postato la richiesta di aiuto su questo forum
– ho letto i messaggi elle vostre risposte
– ho scaricato il file resume.cls e incollato nella mia cartella CV (dove presente cv.tex)
– ho provato a ricompilare e da un altro errore /o meglio una sfilza di errori nuovi)`
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Medium Length Professional CV
% LaTeX Template
% Version 2.0 (8/5/13)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original author:
% Trey Hunner (http://www.treyhunner.com/)
%
% Important note:
% This template requires the resume.cls file to be in the same directory as the
% .tex file. The resume.cls file provides the resume style used for structuring the
% document.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%—————————————————————————————-
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%—————————————————————————————-\documentclass{resume} % Use the custom resume.cls style
\usepackage
{geometry} % Document margins
\newcommand{\tab}[1]{\hspace{.2667\textwidth}\rlap{#1}}
\newcommand{\itab}[1]{\hspace{0em}\rlap{#1}}
\name{MOHIT B. SARVAIYA} % Your name
\address{“AMBIKA”,Patel Colony 9/2 Corner, Opp. Ajay Laxmi Bunglow,Jamnagar-361008.} % Your address
%\address{123 Pleasant Lane \\ City, State 12345} % Your secondary addess (optional)
\address{+91 886 622 1812 \\ mohit.sarvaiya@yahoo.in} % Your phone number and email\begin{document}
%—————————————————————————————-
% OBJECTIVE
%—————————————————————————————-\begin{rSection}{OBJECTIVE}
{Recently graduated, multidisciplinary boxer with excellent problem solving abilities and process-thinking skill seeks hands on experience within a company that embraces creativity and innovation.Through my studies, I have gained extensive knowledge of production and manufacturing engineering, product design, among many other components of Mechanical Engineering.Effective communicator who builds positive, cohesive relationship with all level of staff, eager to put my extensive studies to practical, applied use.}
\end{rSection}
%—————————————————————————————-
% EDUCATION SECTION
%—————————————————————————————-\begin{rSection}{Education}
{\bf Bachelor of Engineering in Mechanical Engineering} \hfill {August 2012 – May 2016}
\\
Sanjaybhai Rajguru College of Engineering, Rajkot.
\\
Gujarat Technological University, CGPA: 7.01/10.00{\bf Diploma in Mechanical Engineering} \hfill {August 2008 – June 2012}
\\
Government Polytechnic, Jamnagar.
\\
Gujarat Technological University, CGPA: 7.53/10.00{\textbf{SSC, Class X}} \hfill March 2007 – March 2008\\
Shree Parvatidevi High School, Jamnagar, Gujarat, 70.1\%
%Minor in Linguistics \smallskip \\
%Member of Eta Kappa Nu \\
%Member of Upsilon Pi Epsilon \\\end{rSection}
%—————————————————————————————-
% TECHNICAL STRENGTHS SECTION
%—————————————————————————————-\begin{rSection}{SKILLS and
INTERESTS}\begin{tabular}{ @{} >{\bfseries}l @{\hspace{6ex}} l }
Skills & Production and Manufacturing Engineering, Automobile Engineering, CAD/CAM,\\
Interests & Mechanical Part Design,Optimization,Quality Control and Assurance,Product Development\\
Design Software & Autocad, Creo, SolidWorks \\
Platforms & MS Word,C \\
\end{tabular}\end{rSection}
%—————————————————————————————-
% WORK EXPERIENCE SECTION
%—————————————————————————————-\begin{rSection}{PROJECTS}
\begin{rSubsection}{Implimentation Of Advance Product Quality Planning (APQP) \\ And Product Part Approval Process (PPAP)}{July 2015 – April 2016}{Major Project}{}
\item An Industrial Defined Project in collaboration with Echjay Industries Pvt Ltd., Rajkot
\item Quality Assurance Technique for reducing waste in material and optimizing a
manufacturing process.
\item Facilitate communication between industries.
\item Improve Customer Satisfaction.
\item Improve Product Quality.\end{rSubsection}
%————————————————.
\begin{rSubsection}{Automation In Threading Machine}{January 2012 – June 2012}{Major Project}{}
\item An Industrial Defined Project in collaboration with Manish Brass Industry, jamnagar
\item Main aim of the project is to reduce human effort and rate of rejection.
\item Designed the automatic attachment for threading machine.
\end{rSubsection}\end{rSection}
% EXAMPLE SECTION
%—————————————————————————————-\begin{rSection}{INTERNSHIP/TRAININGS} \itemsep -3pt
{Quality Control and Assurance Training at Echjay Industries Pvt. Ltd. Rajkot.} \hfill July 2015 – April 2016 \\
{Lab Technician, Senor Metal Pvt. Ltd, Jamnagar} \hfill june 2012 – Auguest 2012\\
{Mechanical Draftsman and Q.C Inspector, Geeta Machine Tools Pvt. Ltd, Jamnagar} \hfill May 2010 – May 2012 \\
\end{rSection}\begin{rSection}{POSITION OF RESPONSIBILITY}
\begin{rSubsection}{Mechanical Draftsman and Q.C Inspector}{May 2010 – May 2012} {Geeta Machine Tools Pvt. Ltd. Jamnagar} {}
\item Prepare 2D AND 3D Drawing and planning of a different CNC machine details
parts drawings and their assembly drawing.
\item Do some quality control work for maintain the quality of machine in the Units.
\item Prepare of foundation and electrical layout drawings.
\end{rSubsection}%————————————————
\begin{rSubsection}{Lab Technician}{june 2012 – Auguest 2012}{Senor Metal Pvt. Ltd. Jamnagar} {}
\item Do Some Mechanical Destructive Testing- Tensile Test, Impact Test,Hardness Test
\end{rSubsection}\end{rSection}
%—————————————————————————————-
\begin{rSection}{Extra-Cirrucular Activities} \itemsep -1pt {}
\item STTP on “Life Long Research” in SVNIT,Surat \hfill February 2016
\item Design War Cad, SRCOE, Rajkot, Secured 2rd rank in a state level competition\hfill January-2016
\item Design War Cad, B.H Gardi, Rajkot, Secured 2rd rank in a
state level competition. \hfill January-2014
\item Participated in National Level Technical Symposium Festival Edge and Above, SVIT, Vasad. \hfill February-2013
\item Participated in National Level Technical Symposium merda me Basix, SVIT, Vasad.
\hfill February-2013
\item Participated in National Level Technical Symposium Rise of Machine, SVIT, Vasad, \hfill March-2014\end{rSection}
\end{document}
`
::
Scusate se riapro un vecchio post: ho inserito tre capitoli di appendice.
Risultato: numerazione completamente errata dell’inizio dei capitoli! Nell’indice il numero è errato, ma rimanda alla pagina giusta …La situazione non cambia neanche se utilizzo l’ambiente
`
\begin{appendices}
…
…
\end{appendices}
`
::
Questo codice è semplificato`
\documentclass{standalone}
\usepackage{tikz}
\usetikzlibrary{timeline}\begin{document}
\begin{tikzpicture}
\timeline{10}% number of weeks% put here the phases
\begin{phases}
\initialphase{involvement degree=1.75cm,phase color=black}
\phase{between week=1 and 2 in 0.5,involvement degree=3cm}
\phase{between week=3 and 4 in 0.7,phase color=blue!80!cyan}
\end{phases}\end{tikzpicture}
\end{document}
`I problemi sono:
– come rinominare week in quello che vuoi tu
– rendere la barra nera trasparente (mi sembra l’unica opzione, dato che toglierla è impossibile, essendo il cuore della creazione)
– far si che i cerchi siano più visibili, così da dare risalto alle “zone calde”
-
AutoreRisposte
